Click image to view full size image
Web based Car GPS Tracker Alarm , GPS Speed Tracking Ignition Cut Detection
- Vehicle GPS tracking device for vehicle fleet recovery and tracking can easily help you to location your vehicle in real time and monitor the trip event on google map.
- Vehicle GPS tracking devices report its location in every seconds, which allows you to view the vehicle’s location, direction and speed.
- GSM/GPS signal on a web based tracking platform, which is using google map.
- In this server there are lots report you can get: working hours report, ignition on/off report,idle report, fuel consumption report.
Specifications:
| Hardware spec | |
| MCU | STM32F103VCT6 (ARM 32-bit Cortex™-M3 CPU) |
| Frequency | Quad-band: 850/900/1800/1900Mhz |
| GPS | uBlox NEO 6M |
| GSM antenna | Enternal |
| GPS antenna | External |
| Inner battery | 900mAh polymer battery |
| Movement Sensor | 3-Axis sensor |
| PIN IO Interface | 4 digital input |
| 4 digital output | |
| 4 analog input | |
| 1 Panic Button | |
| 2 1-wire for iButton and temperature probe | |
| 8 PIN IO Interface | 1 RS232 |
| 1 Speaker | |
| 1 Microphone | |
| USB port | For upgrade firmware and |
| debug purpose | |
| (True USB port, not UART to USB) | |
| SIM socket | 1 standard SIM socket |
| Dimension | 93mm*82mm*30mm |
GPRS and SMS alarm event:
- Emergency button
- shocking alarm by 3 axis sensor
- External power source cut
- GEO fence in/out
- Digital output cut/resume
- Digital input activate/disactivate
- GPS antenna drop/connect
- low battery voltage
- idle speed alarm
Firmware Feature:
- Igniti
Web Based Car GPS Tracker Alarm , GPS Speed Tracking Ignition Cut Detection
